Home

Browse the Product Lines

Setting & Grouting Products

Tile Care Products

Search for a Distributor

Contact Us

Latex Additives



S-800 Setting Acrylic Latex Additive

Short Form Specifications Detailed Specifications

S-800 is a specially formulated and balanced acrylic latex additive for use with Summitville's S-759, S-763, S- 777 and S-780 dry-set mortar formulas. Mortar made with S-800 after curing has excellent water and freeze thaw resistance. When mixed according to instructions, material will improve working, bonding and flexural characteristics of base product. When mixed properly with S-759, S-763, S-777 or S-780, S-800 can be used to set any type of ceramic tile over clean and dry masonry, concrete, brick, fiberglass reinforced backer board, on interior or exterior floors or walls. When setting and grouting, check the ANSI/TCA guidelines for proper substrate and cure conditions. S-800 is available in 1-gallon containers, 5-gallon pails, and 55-gallon drums. Product meets or exceeds ANSI A 118.4.

COVERAGE:
Same as base product. Refer to base product data.





S-810 Flexible Mortar System

Short Form Specifications Detailed Specifications

S-810 is a copolymer latex which, when mixed with S-777 or S-780 Thin Set Mortar, provides a flexible polymer mortar system for setting all types of ceramic tile and natural stones over various substrates. Use the S-810/S-777 system for floors, walkways and ceilings in interior and exterior installations. Available in 2- gallon containers. Meets or exceeds ANSI A118.4. Color: #910 White only.

COVERAGE:
Same as base product. Refer to base product data.





S-775 Grouting Acrylic Latex Additive

Short Form Specifications Detailed Specifications

S-775 is a specially formulated and balanced latex additive for use with Summitville's S-700,S-667 and S-687 grouts. S-775 improves workability, bonding and flexural characteristics of base product, and eliminates the need for damp curing. Has greater bond strength than S-700, 667, 687 mixed with water. Has greater flexibility (important over wood floors). Has improved protection from efflorescence (salts escaping from cementitious substrates). Better color retentivity. Improved shrinkage characteristics. DO NOT WET CURE. Always slake 10-15 minutes to ensure complete moisture migration; when setting and grouting, check ANSI/TCA guide-lines for proper substrate and cure conditions. S-775 is available in 1-quart containers, 1- gallon containers, 5-gallon pails and 55-gallon drums.

COVERAGE:
Same as base product. Refer to base product data.





S-776 Quick-Set Grout and Mortar Additive

Short Form Specifications Detailed Specifications

S-776 is a specially formulated and balanced acrylic latex additive designed to accelerate the curing of S-700, S-667 and S-687 grouts. S-776's quick-set formula is designed to speed up installation and job-site clean-up on applications that must be opened to traffic as quickly as possible. Grouts mixed with S-776 will set in about 3 hours at 75 degrees F; use only where ambient or substrate temperatures are 50-90 degrees F. Mix with grouts only; for quick-set mortars, use S-400 QS or S-2000.

COVERAGE:
Same as base product. Refer to base product data.




Copyright 1997, 1998, 1999 Summitville Tiles, Inc.
webmaster@summitville.com