Cementitious Grouting Products

• S-667 Unsanded Joint Filler
• S-687 Fungus- and Mildew-Resistant Grout (TCA Formula MRG-82)
• S-700 SummitChromes Sanded Joint Filler
• S-710 PolyChromes Sanded Joint Filler
• S-700/S-710 Sanded Grout
• S-667/S-687 Unsanded Grout
• S-750 Thin Brick Pointing Mortar

S-667 is especially formulated to be used on narrow joints.

S-667 Unsanded wall grout is designed for narrow joints when using porous-bodied or glazed tile. S-667 has high compressive strength and is easy to clean. When setting and grouting, check the ANSI / TCA guidelines for proper substrate and cure condition. Available in 5-pound and 25-pound bags. Available in 32 colors. Custom colors are available. Minimum quantity require

S-687 Fungus- and Mildew-Resistant Grout (TCA Formula MRG-82)

S-687 Unsanded wall grout is recommended for narrow joints when using porous-bodied tile. This joint filler is formulated to resist the growth of most prevalent types of fungus and mildew, including black mold, which stain or discolor conventionally formulated grouts. The active ingredient in S-687 is registered with the EPA, No. 2204-19, and is ecologically safe. When setting and grouting, check the ANSI / TCA guidelines for proper substrate and cure conditions. Available in 5-pound and 25-pound bags. Colors: Available in 32 colors. See S-700/S-710 colors.

TEST RESULTS:
Tests performed by the Tile Council of America Research Center conclusively determined S-687 prevents mold, mildew and fungus growth on the grout as well as on a thin layer of growth-supporting medium poured onto the surface of the grout.
	Tile grouted with S-687 shows no mold or mildew growth after 14 days immersion in a growth-supporting medium.
	Tile grouted with conventionally formulated grout immersed in the same substance for 14 days is covered with mold and mildew.
NOTE: We do not recommend sealing S-687. Sealing S-687 can encapsulate the fungicide that prevents mildew growth.

Grout Coverage Chart

S-700 SummitChromes Sanded Joint Filler

S-700 SummitChromes provides a smooth, dense, color fast joint for wall or floor installations. S-700 has high bond strength, compressive strength and hardness, with improved workability and clean-up characteristics . Always wet cure according to ANSI standards; always slake 10-15 minutes to insure complete moisture migration. When setting and grouting, check the ANSI / TCA guidelines for proper substrate and cure conditions; meets or exceeds ANSI A-118.6 specifications. S-700 may be mixed with clean potable water, with S-775 latex, S-776 latex accelerator, S-120 epoxy emulsion or S-600 100% epoxy admix. S-700 is available in 32 colors, custom colors are available in minimum quantities. S-700 SummitChromes is available in 9-pound, 25-pound, and 50-pound bags.

S-710 PolyChromes Sanded Joint Filler Contains Powdered Latex

S-710 sanded grout features a premixed powered latex formula. Simply mix with water for dense, color fast joints. S-710 is less expensive than adding liquid latex to S-700. It eliminates improper thinning (excessive water) of liquid latex. Liquid latex will freeze during shipment in winter months; powdered latex will not. Eliminates wet curing--DO NOT WET CURE. S-710 has higher compressive strength, greater flexibility (important over wood floors), great bond strength and better color retentivity than S-700. It also provides improved protection from efflorescence (salts escaping from cementitious substrates) and improved shrinkage characteristics. Always slake 10-15 minutes to ensure complete moisture migration; when setting grouting, check the ANSI / TCA guidelines for proper substrate and cure conditions; meets or exceeds ANSI A118.6 specifications. Available in the same 32 colors as S-700 with improved Physical Properties. Mix with water only; do not mix with S-775 or S-120. S-710 PolyChrome available in 9-pound, 25-pound and 50-pound units.

S-700/S-710 Sanded Grout
S-667/S-687 Unsanded Grout

914 Arctic White		935 Mexican Sand
911 Biscuit		929 Morel
909 Frost White		920 Palm Beach
916 Almond		999 Coral Reef
921 Fawn		940 Mountain Majesties
925 Buckskin		983 Cranberry
919 Coconut Grove		989 Terra Cotta
992 Peach		987 Clay Red
968 Mist Gray		931 Brownstone
964 Gull Gray		941 Cocoa
963 Silver Gray		947 Walnut
982 Mason Blue		962 Natural
986 Cerulean		951 Camel's Hair
973 Spearmint		966 Gun Powder
974 Verdigris		984 Ocean Blue
979 Forest Green		969 Silhouette

The 32 colors shown above are available in both sanded and unsanded grout.

*Summitville recommends neutral colored grouts for heavy traffic floors. For superior stain resistance and color retentivity, use S-400, S-500 or S-600 Epoxy.

NOTE: All colored grouts, when used on floors, will discolor over time due to normal foot traffic, etc. This will cause a graying of the original color. Keep this in mind when selecting a colored grout for floor application.
Always test your tile with colored grout for staining, especially with black grout, before proceeding with the job. Use SL-90 grout release if necessary to prevent clean-up problems.

S-750 is a factory mixed masonry cement mortar mix designed for use as a pointing mortar that is applied manually, with a grout bag or with a mortar dispensing gun. S-750 was designed specifically for grouting thin veneer brick units such as Summitville Thin brick. S-750 may be used as a tuck pointing mortar by reducing the liquid content of the mix. S-750 has good tooling characteristics not only for appearance, but to seal the interface between mortar and masonry unit. Brick should be set on an approved substrate using S-810/S-777 tile setting mortar system which has cured for a minimum of 48 hours at 70 degrees F, before grouting. Color: Natural Gray. Available in a 70 lb. bag.