S-48 EXPANSION JOINT SEALANT

PRODUCT DESCRIPTION:

S-48 is a two part component system consisting of a base compound and an accelerator, which when mixed together form a pourable joint sealant. The base compound is a combination of liquid epoxy resins, pigments and inert filler. The accelerator when added to the base compound will cure the epoxy resins at room temperature. The cured compound excellent impact resistance and adhesion to steel, aluminum, glass, ceramics, concrete and wood.

S-48 is resistant to attack by mild acids, alkalies, corrosive salts, alcohols and aliphatic hydrocarbons.

USES:

S-48 is not recommended for use in joints greater than 3/8" wide.

TECHNICAL DATA: Physical Properties

MIXING AND APPLICATION:

Make sure that the temperature of the materials is 65 degrees F or warmer before mixing.

To 1/2 the contents of the 7 lb. 8 oz. (3.54kg) can of S-48 Base Compound add 1/2 the contents of the 3 lb. 12 oz. (1.7kg) can of S-48 Accelerator. Mix well. Pour into place. Be sure that joints into which this mixture is poured are clean and dry. This mixture will remain workable for approximately 35 minutes at 77 degrees F and will withstand foot traffic after 4 hours. Do not expose to chemical service for 7 days.

CAUTION:

S-48 Expansion Joint Sealant is for industrial use only. It contains materials that present handling and potential health hazards. Consult Material Safety Data Sheets and the container labels for complete precautionary information before using.

CLEAN-UP:

Mixing equipment should be cleaned with acetone, toluene, xylene or methyl ethyl ketone before S-48 has cured completely.

COVERAGE:

PACKAGING:

Three quarter gallon unit contains:

1 -- 1-gallon can -- 9 lbs. 2 oz. (4.1 kg) Base Compound

1 -- 1 pint can -- 1/2 lb. (.231 kg) Accelerator

SPECIFICATIONS:

Material: S-48 Expansion joint sealant shall be a two-component system that when mixed together forms a pourable joint sealant. S-48 shall be flexible and resistant to attack by mild acids, alkalies, corrosive salts, alcohols and aliphatic hydro- carbons. S-48 is not recommended for joints wider than 3/8". S-48 shall be supplied by Summitville Tiles Inc., Summitville, Ohio. Color shall be # ___________________________________.